FORD F-150 TPMS RESET
How to Reset the TPMS On Ford F-150 from year 2007-2008-2009-2010-2011-2012-2013-2014-2015-2016-2017-2018-2019.
About Ford F-150
The Ford F-Series is a series of light-duty trucks and medium-duty trucks (Class 2-7) that have been marketed and manufactured by Ford Motor Company. In production since 1948, the F-Series includes full-size pickup trucks, chassis cab trucks, and commercial vehicles. As of 2019 production, the Ford F-Series includes the F-150 pickup, Class 3-5 Super Duty trucks (F-250 through F-550), and the Class 6-8 Super Duty trucks (F-600, F-650, F-750). The most popular version of the F-Series is the F-150, now in its thirteenth generation.
The F-Series has been the best-selling pickup truck in the United States since 1977 and the best-selling vehicle since 1986, it is also the best selling vehicle in Canada. As of the 2018 model year, the F-Series generates $41 billion in annual revenue for Ford, making the brand more valuable than Coca-Cola and Nike.
In 1999, to bridge the gap between its pickup line and its medium-duty trucks, Ford introduced the F-250 and F-350 as Super Duty trucks. Considered an expansion of the F-Series, the Super Duty line is built on a distinct chassis architecture with heavier-duty components. In 2000, the Super Duty range was expanded to include Ford medium-duty trucks.
At various times, Ford has marketed the F-Series across all three of its divisions in North America. Mercury sold the F-Series as the M-Series from 1948 to 1968 in its Canadian sales network (alongside the Econoline, Medium-duty trucks and Panel Trucks); during the 2000s, Lincoln sold the Blackwood and later the Mark LT.(source:wiki)
TPMS RESET
Note: Your need TPMS Scan tool for this car model.
Relearn Procedure for Models WITH STANDARD IGNITION.
- Inflate all tires to pressure listed on vehicleplacard.
- Turn ignition to OFF position and press and release brake pedal.
- Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
- Press and release brake pedal.
- Turn ignition to OFF position.
- Cycle ignition from the OFF to RUN position 3 times, ending in the RUN position.
- Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
- .Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
- After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
- Turn ignition to the OFF position.
Relearn Procedure for Models WITH PUSH-BUTTON IGNITION.
- Inflate all tires to pressure listed on vehicle placard.2.With the
- vehicle off, press and release the brake pedal.
- Press,and hold,the START button until a chime sounds.
- Power OFF by pushing the button 1 time.
- Press,and hold, the S TART button until a chime sounds.
- Power OFF by pushing the button 1 time.
- Press,and hold, the START button until a chime sounds.
- Press and release the brake pedal.
- Power OFF by pushing the button 1 time.
- Press,and hold, theS TART button until a chime sounds.
- Power OFF by pushing the button 1 time.
- Press,and hold, the START button until a chime sounds.
- Power off by pushing the button 1 time.
- Press,and hold, the START button until a chime sounds.
- Horn will sound once,and the TPMS telltale will blink once, indicating train mode is initiated. If equipped with a message center, it will display TRAIN LF TIRE.
- Starting with the LF tire, use your TPMS scan tool to scan each sensor in the following order: LF, RF, RR, LR (and full size spare if equipped). The horn will sound once each sensor has been recognized.
- After training LR tire, the message center will display TRAINING MODE COMPLETE. If the vehicle is not equipped with the message center display, successful completion can be verified by turning the ignition to the OFF position and not hearing the horn sound. If the horn sounds, then the training procedure must be repeated.
- 18.Turn ignition to the OFF position.
Thank you very much!
